I am trying to use the scanner but it keep saw Scanner not found?

I'm pretty sure adjectives the cables are connected properly. And I know it is installed. I own used it before. The merely difference is that latley my sister have be hooking her digital canmera up where the scanner is supposed to connect.

I am trying to use the scanner but it keep saw Scanner not found?

OK, let's transport this step by step.



You don't seem to enjoy added the scanner. or the path have been changed because your sister have hooked up her cam from that port.



I hope it's XP that youre using.



Go to Start and click on it.



Go to Control Panel and click on it.



Go to Printers and other Hardware and click on it.



Go to Scanners and Cameras and click on it.



If you see your scanner there afterwards see if it has a red x against it.



You'll probably see nil there, because your sisters using the cam must enjoy erased the add.



Now look to the vanished top corner and you'll see Add imaging device. Click on this.



It'll launch the Wizard and from there on, it's uncomplicated.



All the best.



Cheers!



ST



OH, 98?



Sorry, I don't have the information on that one.
check the wires
Unplug your sister's camera and plug within your scanner.
You may need to reinstall the driver for your scanner. Drivers are generally on the CD that come with a scanner. Unplug the scanner from your computer, install the drivers consequently plug the scanner back into the computer and turn on. Good luck.
Hi

Do a experiment on it. Or go to aid. Help will be able to relay what is the problem
reconnect the scanner and install the scanner driver cool